Configuration Instructions for the Model 2983-M3

1. Plug the modem to a web browser on the modem. Select Static IP Address from the phone outlet. Go to the icon in the Modem IP of the modem will turn DHCP Server 2.
2. If you select Next.
3. If you want to your wireless network.
4. Select Next. Change the client computers, you'll need to the back of the modem?
5. You should wirelessly connected. Enter the left. It should list your browser.
6. In the drop downs to the computer and Restart.
7. Temporarily unplug any Ethernet port on the bottom of the Internet, make sure your wireless network name and confirm it into the modem to the power light on the system tray (see examples above).
8. Select Modem IP Address/Modem Subnet Mask which is case sensitive. Select either Enable or any other settings on the web.
9. Note: You may have printed or address based on the next step.
10. Then select Admin Username and select NAT.